Dual Action Air Sander Mirka with Orbit Adjustable

Product Description

6 inches random orbit air sander feature:

• 6" air sanders hook and loop face design with hook and loop function.
• 6" pneumatic sanders.
• Sander tools, a built-in regulator in sander allows you to adjust the speed with which you work to satisfy your different sanding, polishing and waxing requirements, for quick and accurate results.
• Suitable for iron, wood, plastic, metal, rubber, stone, marble and other materials grinding, fine polishing.
• Different types of sandpaper can be installed with a different type of disc.
• Long-time working without fatigue.
• Fast sanding speed and high working efficiency.
• 40Cr Cylinder.
• Ergonomic design for increased comfort and convenient level.
• High rotation speed.

 

6 inches random orbit air sander technical specifications:

• 6" hook and torus pad (diameter 6 Inches /150mm).
• Air sander net weight with 6 inches pad: 1020g.
• Length: 150mm.
• Height: 95mm.
• Average air consumption: 8 CFM (226L/min).
• Non-load rotation: 10000 rpm.
• Orbit diameter: 3/16".
• 1/4 NPT quick connector. (American standard).

 

Sander should be kept dry and can not be stored in a humidor open-air place.

(NOTE: our sander can not be used for wet grinding, if needed, please purchase the specialized water mill tools. )

What's in the Box:

 

• Super random orbital sander with 6 inches pad 1 pcs.
• 22 mm pad wrench 1 pcs.
• Instruction manual 1 pcs.
• American standard 1/4 NPT quick connector 1 pcs.
•  

Instruction manual for 6 inches random orbit air sanders

• Please check off all tightening parts of the tools to be in good condition before operation.
• Working pressure to be 6.3 kg/cm3 (90PSI) at operation.
• Please refer to Figure 1 for the tool installation. To install a filter and a lubricator/oiler at an air outlet
• The best hand stress on the tool is from 5Kg to 7Kg when operation.
• Release the air supply when replacing the sandpaper or the backing pad.
• Wear protection glasses, eye protector, dust mask and gloves at operation.
• Have a short break in every 30minutes to avoid any possible injury due to tiredness.
• Do not have free rotating at high speed to avoid possible injury to the human body and possible tool damage.
• Do not touch the rotating part of the tool with your hand or your body at operation.
• Start your sanding job after you fit the sanding pad flat on the surface you are working on. Please refer to Figure 2.

 

Routine maintenance for 6 inches random orbit air sanders

• Stop your Job when finding any irregular sound or vibration at operation and then check and repair the tool.
• Because you are using clean compressed air at operation. Use an air filter at the air installation to clean the dust out of the compressed air.
• Drop some Oil to the inlet of the tool and then run the tool slowly for a minute and finally start your work...Auto Lubricator/oiler is recommended.
• Any dirt dust inside the motor may result in slow rotation even block running, at this time, try to drop some oil from the inlet, see whether solve the problem or return to the seller for maintenance.
• Do release the water out of the air compressor and air hose after an operation.
• Maintain tools with care. Keep tools clean for better and safe performance, follow instructions for lubricating. Inspect tools cords and air hoses periodically, if damaged, have them repaired by an authorized technician.

Our customers: BMW,Peugeot,HONDA,FOXCONN,ZOOMILIAN,Chengdu Aircraft Industrial Group and CSR etc

OVERSEAS DISTRIBUTORS ARE WANTED!!!
OVERSEAS DISTRIBUTORS ARE WANTED!!!
OVERSEAS DISTRIBUTORS ARE WANTED!!!

We are a leading manufacturer&supplier of air tools and related abraisves in China.
We supply
1) 1``~ 6``Air Random Orbital Sander/Polisher(3M & MIRKA Quality);
2) 2``~ 9``Air Angle Grinder (FUJI Quality);
3) Air Die Grinder (FUJI Quality);
4) Air Micro Grinder (Pencil Grinder);
5) Air Screwdriver;
6) Air Wrench;
7) Air Belt Sander;
8) Air Drawing Machine;
9) Air File;
10) Sanding Pad&Paper/Grinding Wheel/Sanding Sponge;
11) Air Squeezer;
12) Air Pull Setter;
13) Air Drill;
14) Air Spray Gun;
15) Squeeze Riveter(For Precision Machinery Industry such as Aviation etc.)
And so on.

For more details,pls do not hesitate to contact us : )